Netatmo logo

Installation guide

Welcome

Compatibility

Pack contents

Toolkit

Product overview

Setting up the Smart Door Lock

Removing the existing cylinder

Measuring the external thickness of the door

Choosing the external extension kit

External thickness of 35 mm or 40 mm

Installing the extension kit on your Smart Door Lock

Measuring the internal thickness of the door

Identifying the thickness of your door from the inside

Setting the internal length of your Smart Door Lock

Fitting the batteries

Installing the Smart Door Lock (1/3)

Installing the Smart Door Lock (2/3)

Installing the Smart Door Lock (3/3)

Installing the outdoor knob

Testing the lock from the inside

Testing the Door Lock from the outside (1/2)

Testing the Door Lock from the outside (2/2)

Property Card

What to do in case of an empty battery

Troubleshooting (1/2)

Troubleshooting (2/2)

Downloading the Home + Security app

United States - English

Helpcenter

Installation guide

Install the extension kit (35, 40, 45 or 50 mm) on your Smart Door Lock

  • 1. Open the USB cover by moving it to the right.
  • 2. Unscrew the holding screw on the front panel using the Allen key and remove the end of the Euro cylinder. You will not need this screw anymore.
  • 3. Remove the black connector at the bottom of the Euro cylinder. You will not need it anymore.
  • 4. Insert the extension kit selected in the previous step (35, 40, 45 or 50 mm).
  • 5. Re-insert the end of the Euro cylinder and tighten the screw selected in the previous step. Then close the USB cover.
Next