Installation guide

Welcome

Compatibility

Pack contents

Toolkit

Product overview

Setting up the Smart Door Lock

Removing the existing cylinder

Measuring the external thickness of the door

Choosing the external extension kit

External thickness of 35 mm or 40 mm

Installing the extension kit on your Smart Door Lock

Measuring the internal thickness of the door

Identifying the thickness of your door from the inside

Setting the internal length of your Smart Door Lock

Fitting the batteries

Installing the Smart Door Lock (1/3)

Installing the Smart Door Lock (2/3)

Installing the Smart Door Lock (3/3)

Installing the outdoor knob

Testing the lock from the inside

Testing the Door Lock from the outside (1/2)

Testing the Door Lock from the outside (2/2)

Property Card

What to do in case of an empty battery

Troubleshooting (1/2)

Troubleshooting (2/2)

Downloading the Home + Security app

United States - English

Set the internal length (35, 40, 45 or 50 mm) of your Smart Door Lock

1. Unscrew the fixing ring from the Smart Door Lock, then remove the cover.
2. Remove the positioning screw using the Allen key.
3. Pull the battery case to align the hole with the etching that corresponds to the internal length previously measured with the tool.
4. Tighten the positioning screw.