Installation guide

Welcome

Pack contents

Before you start

Installation options

Wired installation of the thermostat

Installing the Netatmo Relay

Connect the Netatmo Relay

Turning off the power at the mains

Replacing your old thermostat (1/2)

Replacing your old thermostat (2/2)

Preparing your new wired installation

Warning for a wired installation

Installing the wall bracket (1/4)

Installing the wall bracket (2/4)

Installing the wall bracket (3/4)

Installing the wall bracket (4/4)

Personalising the Smart Thermostat (optional)

Powering the Smart Thermostat

Setting up the Smart Thermostat (1/3)

Setting up the Smart Thermostat (2/3)

Setting up the Smart Thermostat (3/3)

ON/OFF operating tests (1/2)

ON/OFF operating tests (2/2)

Download the application

United States - English

Installing the wall bracket (1/4)

1. You'll need a spirit level, a drill with a 6 mm drill bit, a pencil and the 4 screws and wall plugs provided.
2. Use a spirit level to make sure the bracket is lined up correctly. Mark each corner with the pencil as your reference points.