Installation guide
Welcome
Pack contents
Before you start
Before you start
Installation options
Wired installation of the thermostat
Installing the Netatmo Relay
Connect the Netatmo Relay
Turning off the power at the mains
Replacing your old thermostat (1/2)
Replacing your old thermostat (2/2)
Preparing your new wired installation
Warning for a wired installation
Installing the wall bracket (1/4)
Installing the wall bracket (2/4)
Installing the wall bracket (3/4)
Installing the wall bracket (4/4)
Personalising the Smart Thermostat (optional)
Powering the Smart Thermostat
Setting up the Smart Thermostat (1/3)
Setting up the Smart Thermostat (2/3)
Setting up the Smart Thermostat (3/3)
ON/OFF operating tests (1/2)
ON/OFF operating tests (2/2)
Download the application
United States - English
Installation guide
Installing the wall bracket (2/4)
Drill four 6 mm holes at these markings. Then hammer in the 4 wall plugs provided and pass the two remaining boiler control wires through the wall bracket.